How to use Organ Developer Pump after using Sanda (Saandhha) Oil
How To Use Organ Developer Pump after applying Sanda (Saandhha) oil
1.) Connect the Part of the Cylinder with the Connecting Pipe well without air leakage.
2.) Select a Rubber ring of proper size and put it on the opening of the cylinder,
3.) Connect the gun with other end of the connecting tube.
4.) Let the Organ be against the hole of the Rubber ring.
5.) Hold the cylinder by the left Hand; slowly slide the Organ into the cylinder, the rubber ring should grip the root of the Organ without air leakage.
6.) Pull the lever of the gun by the right hand again and again, so that there should be enough vacuum inside the Cylinder and the Organ got stretched by the process.
7.) Then after 1 minute disconnects the Green Rubber tube and the cylinder, gently lift the piston of the cylinder to let the air enter the cup so as to the pressure inside the cup and outside the cup is equal.
8.) Then Again Connect the Cylinder with the Green Rubber tube.
9.) Repeat the process till 10-15 minutes
Practice this above steps for 10 minutes after applying Sanda oil on Male Organ.
Visit www.ayurvedic-homeopathic.com for Product Purchase